Xerox AltaLink C81 Series User Manual page 324

Troubleshooting
4. To remove the jammed staples, pull the staples in the direction shown.
WARNING:
carefully.
5. Hold the tabs on both sides of the staple cartridge and insert the cartridge into the original
position in the finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
6. Repeat the procedure for the other staple cartridge.
7. Close the finisher side cover.
324 Xerox ® AltaLink
User Guide
The points of the jammed staples are sharp. Remove the jammed staples
® C81XX Series Color Multifunction Printer