Xerox AltaLink C81 Series User Manual page 322

Troubleshooting
6. To open the staple cartridge clamp, pull the clamp in the direction shown.
7. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks
into the locked position.
WARNING:
carefully.
8. Grasp the orange handle, then insert the cartridge into the stapler assembly until the cartridge
clicks into place.
9. Close the finisher front door.
322 Xerox ® AltaLink
User Guide
The points of the jammed staples are sharp. Remove the jammed staples
® C81XX Series Color Multifunction Printer