Table of Contents
Advertisement
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
The procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note:
To avoid jams and misfeeds, do not remove paper from its packaging until you are
ready to use it.
5. Load the paper in the tray. Do one of the following:
• For long-edge feed:
• Insert letterhead and pre-printed paper face down with the top edge toward the front.
• Load hole-punched paper with the holes to the left.
Note:
Do not load the paper above the maximum fill line. Overfilling the tray can cause
paper jams.
• For short-edge feed:
• Insert letterhead and pre-printed paper face down with the top edge toward the left.
• Load hole-punched paper with the holes to the back.
Note:
Use short-edge feed for custom-size paper and special media.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
Paper and Media
197
User Guide
Advertisement
Table of Contents
Troubleshooting
