Operation - HOFFEN DK-9355 Instruction Manual

Open the packaging and carefully take the appliance out. Make sure that the set
is complete and that its components are undamaged. Check that plastic parts are
not broken and the power cord is not damaged. If you find that any components
are missing or damaged, contact the vendor and do not use the product. Retain the
packaging or dispose of it in accordance with local regulations.
Attention! To keep children safe, do not leave any packaging parts
(plastic bags, cardboard boxes, expanded polystyrene elements etc.)
freely accessible. Danger of suffocation!
7.1 Before use
1. Unravel the power cord located in the base. Place the base on a dry, flat and
stable surface.
2. Fill the electric kettle with clean water without exceeding the maximum level.
3. Connect the power cord to an electric outlet.
Attention! Before first use, fill the kettle with clean water without exceeding the
maximum level, then boil the water in accordance with point 7.4. Boiling water.
Pour the water out and repeat the sequence 2 – 4 times.
Attention! The appliance should be disconnected from the mains whenever it is
to be filled or topped up with water. Pouring water over the base of the kettle may
result in an electric shock.
7.2 Opening and closing the lid
1. To open the lid, pull up lid opening handle.
2. To close the lid, press it down on the kettle.

7.3 Operation

Remember to boil clean water 2-4 times before the first use (point 7.4 Boiling water).
Attention! Fill the appliance with cold and fresh water only.
Warning! The temperature can be set between 60°C and 100°C. The temperature
changes every 5 ° C.
1. Place the kettle on its base on a flat and stable surface.
2. Fill the kettle up to the desired level. Do not overfill the kettle, so that water does
not splash out or spill. The water level indicator will help you draw a suitable
amount of water. Always make sure that the water level is between the MIN and
MAX marks. Do not forget to close the lid after you fill the kettle with water.
3. To switch the appliance on, press the on/off switch: the LCD display will be
illuminated and the current water temperature will be shown.
4. Press the temperature up button and select the desired value or press once and
the display will show the value 100 ° C.
5. Push the on/off switch to boil water. The LCD in the on/off switch will turn on.
3
7. OPERATION
21