Auto Provisioning - Grandstream Networks GXP1615 User Manual

to PBXware.
Dial *123 to verify registration.

Auto Provisioning

This section describes how to set UAD settings, create the PBXware Extension, and register the
phone using DHCP or Static IP address.
The following topics are covered:
UAD Settings
Creating Extension
Registering Phone
UAD Settings
UAD settings
Log in to the PBXware's web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Log in to PBXware with your e-mail address and password.
UAD Settings
Navigate to Settings: UAD.
Make sure that the Grandstream UAD is enabled. To check the UAD status, click the Edit icon
corresponding to your Grandstream phone.
Make sure that Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to
Yes.
Click the Save button to save changes.
Creating Extension
Creating Extension
Add the Extension
Navigate to Extensions. Click the Add Extension button.