Auto Provisioning - Grandstream Networks GXP-2140 User Manual

Auto provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the
phone using DHCP or Static IP address.
The following topics are covered:
UAD settings
Creating extension
Registering phone
UAD Settings
UAD settings
Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings
Navigate to Settings:UAD.
Make sure Grandstream UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Grandstream phone.
Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating Extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Select Grandstream phone model from the UAD select box.