Grandstream Networks GXP1615 User Manual page 6

Hide thumbs Also See for GXP1615:
Table of Contents

Advertisement

Name
Enter a name for the Extension being created. Example: John Smith.
E-mail
Enter the e-mail address associated with this Extension. This e-mail address will receive
all system notification messages. Example: john.smith@bicomsystems.com
Click the Save button.
Registering Phone
This section describes how to register a Grandstream phone using Hostname or IP Address,
or DNS SRV.
The following topics are covered:
Hostname or IP Address
Registering Your Device
Line configuration from the device's web interface
To access the web interface of your Grandstream phone, first you must know it's IP address on
your network.
To find the IP address of your device, please do the following:
Press the Home button.
Go to Status and press the Select button.
Go to Network status and press the Select button.
IP address is displayed under IPv4: e.g. 192.168.8.198
NOTE: Depending on your Grandstream device and its firmware, web interface settings may
vary.
Once you have entered the IP address, a log in menu will pop up, where the username is
admin and the password is admin.
After you log in, under the Accounts tab, you should select Account 1 -> General Settings.
Enter your Extension name into the Account Name field.
Enter your server address into the SIP Server field.
Enter the Extension's Username into the Authenticate ID field.
Enter the Extension's Secret into the Authenticate Password field.
Press the Save and Apply button to preserve any changes. Your phone should register after a
couple of seconds. If not, please reboot your phone.
If everything is done as described above, you should have successfully registered your phone

Advertisement

Table of Contents
loading

Table of Contents