Mountain Models PeregrinE Micro Manual page 6

W7
9. Press the ribs into the W4 trailing edge part.
Do NOT glue.
10. Press the ribs into the W3 leading edge
support part. Do NOT glue.
11. Press the W8 rib into place.
W6
W5
8. Slide the 4 ea. W5 ribs, W6 rib, and W7 rib onto the RIGHT
side of the spars, W1 and W2. Be careful with W6 and W7
since the spars do not rest on your table there. Use a
finger on the bottom of the spars when pressing these ribs
in place. Do NOT glue them in place yet.
W5
W5
W5
W8