Advertisement
28. Glue the F20 parts in place in the
inside of the fuselage sides.
F20
F13
29. Press F13 in place. Once again, ensure
that the fuselage is straight and glue
with thin CA.
30. Lightly sand the fuselage with 320 grit
sandpaper.
31. Assemble the 3 wheels, as shown on the plans.
32. Bend and cut the main landing gear wire, as shown
on the plans, and then bend and cut the nose gear
wire, as shown on the plans.
33. Secure the wheels to the landing gear, as shown on
the plans.
Advertisement
