Advertisement
34. Assemble the horizontal stabilizer and vertical fin, as shown on
the plans, with thin CA.
35. Lightly sand the stab, elevator, vertical fin, and rudder with 320
grit sandpaper.
36. Cover your airplane with SoLite, tissue, or silkspan. Do NOT use
heavier coverings, as this is a light weight model and heavier
coverings can easily damage the structure of the wings and tails.
F18
F17
37. Press the landing gear into the slots on the
fuselage bottom. Press in the landing gear
retaining parts, F17 and F18. You can use thin
CA to glue in the retainers, if you do not want
to remove the landing gear later on.
Advertisement
