BT Broadband Quick Start Manual page 21

Use your wireless adapter's software to set up your wireless connection – its
5
help function may be useful if you're not sure how to do this – or follow the
instructions for your computer's operating system below.
Windows XP and Window Vista
Go to Start, click
1
XP: click Wireless Network
Vista: click
Highlight your Hub's network
2
name (checking the last four
digits match your Hub's details
e.g. BTHomeHub2-022B) and
click Connect.
Type your Hub's wireless key into the:
3
Network Key
XP:
Security key or passphrase
Vista:
Click Connect
4
moments while your computer
connects to your Hub.
> If your computer displays 'Windows cannot configure this wireless
connection', see page 42
> If your computer's wireless adapter / software doesn't have a WPA option,
see page 41
Open your web browser – you should be on the internet. If you can't connect to
6
the internet, please restart your computer and try these steps again.
> If you still can't connect, please check your computer's IP settings are
correct (see page 44) or run the CD
> If a dial-up window appears, see page 45
Set-up
18
Connect To.
Connection.
Connect to network.
box.
and wait a few
Mac OS X
Click the
1
the menu bar. If necessary, turn
on AirPort.
Highlight your Hub's network name.
2
Mac OS X 10.4 and earlier only:
3
in the Wireless Security
WPA Personal.
Type your Hub's wireless key into
4
the Password
Click OK
5
box. while your computer connects to
your Hub.
AirPort status icon in
box, select
box.
and wait a few moments