Plug In Hub - BT Broadband Quick Start Manual

5

Plug in Hub

Your Hub needs to be plugged into mains power and one of the ADSL filters that
you fitted in step 4.
Plug the broadband cable (grey ends) into the Broadband socket on your Hub
1
and the DSL socket on one of the ADSL filters.
Plug the power cable into your Hub's power socket and a nearby mains
2
power supply and turn on power at the power socket.
1
Please don't plug in the Ethernet cable (yellow ends) just yet – we'll tell you
when to connect this if you need to.
If the broadband cable (grey ends) isn't long enough to reach one of your
ADSL filters, please see 'Can I use an extension lead to connect my Hub to
my phone socket?' on page 35.
Set-up
14
2