BT Broadband Quick Start Manual page 19

Connect computer using CD (recommended)
Run the CD to help you connect your computer to your Hub and make sure your
computer is set up correctly for using BT Total Broadband. If you have more than
one computer, run the CD on each one to connect it to your Hub.
Insert the CD into the computer that you want to connect to your Hub.
1
Your CD is in your
welcome pack
Wait a few moments for the CD to start, follow the on-screen instructions.
2
> If CD doesn't automatically run, see page 33
> If CD asks you to enter your
Connect computer manually using wireless
If your computer is already connected to your Hub using an Ethernet cable,
1
unplug this cable.
Place your computer close to the Hub for a good wireless signal.
2
If you haven't already, install your wireless adapter in your computer using
3
the adapter manufacturer's instructions. If you're using a laptop with built-in
wireless, turn wireless on by either using the wireless switch (if your computer
has one) or activating wireless from within your wireless software. Your wireless
adapter must be 802.11b, g or n compliant.
Set-up
16
C D
d b a n d
l B ro a
B T T o ta
BT Total Broadband
CD
v1.1.0
username
and password, see page 34