Caple C901H Instruction Manual
Caple C901H Instruction Manual

Caple C901H Instruction Manual

Halogen 2+2 hob white

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C901H and is the answer not in the manual?

Questions and answers

Summary of Contents for Caple C901H

  • Page 2: Table Of Contents

    Thank you for buying your new CAPLE Ceramic Hob. To ensure that you get the best results from your new CAPLE Ceramic Hob, we strongly suggest that you read this instruction manual thoroughly before use. This manual contains installation advi- ce, usage instructions and a cleaning guide, as well as other important facts about your CAPLE Ceramic Hob.
  • Page 3: Fitting Your Hob

    Fitting Your Hob Minimum distance of hob to back wall Minimum height of a cabinet directly 50 mm. above hob if not fitting a hood 900 mm. Minimum distance of hob from only Minimum of 650 mm from the hob to vertical surface either side of the hob a cooker hood.
  • Page 4 2. Apply the adhesive seal around the edge of the hob ensuring that the ends do not over lap or leave a space. (Fig. 2). Adhesive side Fig. 2 3. Place the hob in the work top cut out and secure it in position by using the brackets as indicated in Fig.
  • Page 5: Electric Supply Requirements

    Electric Supply Requirements WARNING! A double pole switch must be provided This appliance must be earthed. no further than 2 metres from the appliance to the electrical supply. Your hob must be installed by a qualified All supply current and earth conductors electrician in line with all electrical and must be able to withstand an ambient installation requirements published by...
  • Page 6: How Your Halogen, Radiant Or Quickstarthob Operates

    How Your Halogen, Radiant or Quickstarthob Operates Fig. 7 Fig. 6 Mod. C 901 H/W, C 901 H/B: Mod. C 801 C/W, C 801 C/B: This models features 2 mixed halogen This model features 4 quick-light star hobs and 2 ordinary radiant hobs radiant hobs (Fig.
  • Page 7: Halogen Hotplates

    Halogen Hotplates The halogen plate comprises of two halogen lamps and 1 heating element. This plate is controlled by the infinite control switch, which is numbered 1 - 11. Fig. 9 Fig. 8 Turn the control knob clockwise. The light on the control panel will be lit when the hotplate is in use.
  • Page 8: Quickstart Hotplates

    Quickstart Hotplates Each quickstart plate is comprised ot three elements whicn can be controlled either separately or together using the 7 position switches. The three elements can be seen below: The temperature control knobs must be turned anti clockwise as shown in fig. 12. When a plate is on the light on the con- trol knob will be lit.
  • Page 9: Safety Hints

    Safety Hints Cooking Hints 1. Never put cooking foil or plastlc mate- Position rials on the ceramic surface when the TYPE OF COOKING hob is hot. switch 2. Make sure that the hob is clean before you use it. 3. Remember that the plates will remain Keeping dishes warm hot for approximately half an hour Melting (butter, chocolate etc.)
  • Page 10: Cookware

    Cookware It is very important that the pans used Cast Iron – The base may be rough on the hobs are made of a suitable mate- which will scratch the hob. rial and have the correct base as follows: Toughened – If the pans become too The base should be flat and smooth.
  • Page 11: Wiring Diagrams

    Wiring Diagrams Mod. C 901 H/W, C 901 H/B: Mod. C 801 C/W, C 801 C/B:...
  • Page 12: Your Guarantee

    YOUR GUARANTEE CAPLE guarantees all parts of this product for one year from the date of pur- chase. During that time, should it become necessary CAPLE engineers will replace or repair all defective parts free of charge, except for parts subject to fair wear and tear, such as lightbulbs.

This manual is also suitable for:

C901w

Table of Contents