Table of Contents
Advertisement
DPP-255 User Manual
Getting Started
Refer to these sections to help you get the DPP-255
printer ready for use:
What to do
Charge the DPP-255
Lithium-ion battery pack
fully before first use.
Load DPP-255 print
media, that is thermal
paper.
Install software from
the SDK onto your
mobile device to use the
features of the printer.
Set-up Bluetooth pairing
to communicate with the
printer.
Developing Applications
Software is not provided with your mobile printer. Please
contact your reseller or Infinite Peripherals for Third Party
software solutions.
Integrating the printer with your mobile application requires
the use of the Infinite Peripherals Software Developers
Kit (SDK). The SDK incorporates an API specifically
for developing applications to use the magnetic strip
functionalities of the printer.
To download the InfineaSDK or IPCMPPrinterSDK, access
our Development Portal at https://developer.ipcmobile.com/
Accessories
Visit our website at
https://ipcmobile.com
Infinite Peripherals account representative for additional
information about our current and future product
accessories.
Section
Charging Your DPP-255
Using Your DPP-255
Developing Applications
Bluetooth Pairing
or contact your
DPP-255 Printer Features
The mobile thermal printer captures data from personal
computers and other host systems through serial (RS232C),
USB, or Bluetooth (MFi or SPP) connectivity. The versatile
functionality built-in the printer allows you to use the data
output application of your choice.
Key Features
•
Maximum 100mm per second, high-speed (standard unit)
•
Maximum 62.5mm per second (peeler unit)
•
Water and dust resistant with case (IP54)
•
Drop 'n load design
•
Multiple settings: adjustable line spacing, variable paper
guide, paper feed, print density
•
Print capability for barcode and 2-dimensional code
printing HEX-dump and test printing, large characters,
graphic by bit image, downloaded and user-defined
characters, table layout
•
Page mode for portrait/inverse images, clockwise 90
degrees/counter-clockwise, 90 degrees, and overlapping
printing
•
Registered graphic data
•
Command system for ESC/POS
•
Different character codes supported
Physical Features
Buttons
•
Power - press to turn power On/Off
•
Feed - press to feed paper through the printer
•
Print - press to configure printer settings
•
Paper cover release - press to open the paper cover
LED Indicators
•
Power - status of the printer and battery pack
•
Status - operational printer status
•
Air - Bluetooth connection status
Covers
•
USB/Serial - wired interface cover
•
Battery - cover for battery compartment
•
DC - adapter and DC jack cover
Misc
•
Paper Guide - adjustment for width of paper
•
Stopper - paper guide lid
•
Peeler unit - use to remove the label from a label roll
8
Advertisement
Table of Contents
Need help?
Do you have a question about the DPP-255 and is the answer not in the manual?
Questions and answers