Getting Started - Infinite Peripherals PP-60 User Manual

Getting Started

The IPC PP-60 allows you to printer information from your PDA &
Smartphone. Before using the PP-60 thermal printer the battery
should be properly charged. The following Quick Start guide will
help to get your PP-60 ready for use.
Quick Start:
Steps What to do
Charge the PP-
60 rechargeable
1 battery pack as
recommended in
this manual.
Load PP-60 print
2 media (Thermal
Paper)
Connecting PDA
3
to PP-60.
Install PP-60
4
Software
Infinite Peripherals, Inc.
www.ipcprint.com
PP-60 User Manual v1.0
Purpose
The Lithium Ion
battery pack
should be fully
charged before
use to ensure
long battery life.
PP-60 requires
Thermal paper for
printing.
Attaching the
PDA to the PP-60
and securely
locking PDA
cover in place.
To print
information from
your device,
software needs to
be installed onto
your device.
Table 3
. . . . . . . . . . . . . . . . . . . .
Where to find more
information
Charging Battery, Page 10
Loading Paper, Page 12
PDA Installation, Page 13
Printing software is not
provided by IPC. Please
contact your PP-60
reseller or Infinite
Peripherals for
recommendations on
Third-Party solutions.
Developers should refer to
the section in this manual
on "Developing Solutions".
Page 7