Table of Contents
Advertisement
DPP-255 User Manual
Charging Your DPP-255
Before operating the DPP-255 printer, ensure the battery
pack is charged for at least 3 hours. Monitor the battery
status after the initial charge. If the battery is full charged,
but the operating time is too short, replace th battery.
Note
Ensure the input cord is connected to the AC adapter before
charging the battery.
To prevent electrical damage to your printer and/or battery
pack, only use the approved AC charger provided with the
printer.
1.
Pull the DC jack port tab backwards.
2.
Insert the AC adapter into the port.
3.
Introduce the AC adapter plug into an appropriate power
outlet to begin charging.
Charging LED Status
Battery LED indicators display the modes of operation
such as connection status and charging and/or low battery
conditions.
Color
LED Status
Paper is out or
Solid Red
stopped printing.
Printer head is over
Flashes Red
heating.
Battery charging
Solid Green
complete.
Power is on.
Battery is low.
Flashes
Green
Bluetooth paired.
Flashes Blue
Action
Turns green once
paper is replaced.
Turn off printer.
N/A
Charge battery.
N/A
Replacing Battery
1.
Open the cover to the battery compartment on the
bottom of the printer.
2.
Remove the battery.
3.
Place a new battery pack into the battery compartment.
4.
Replace the cover.
Battery Disposal
All spent batteries must be disposed of in accordance with
Federal law. This includes taking the battery to a recycling
center or hazardous waste collection site.
12
Advertisement
Table of Contents
Need help?
Do you have a question about the DPP-255 and is the answer not in the manual?
Questions and answers