Dishwasher Operation; Preparation; Protecting The Environment; Selecting And Starting The Dishwashing Programme - Hanseatic HGTI6082D137709HS User Manual

Page EN-22

Dishwasher operation

Preparation

• Read chapter „Safety" from page EN-4, in
particular the safety instructions.
• Set up and connect the appliance as de-
scribed in chapter „Installation, connection
and starting-up" from page EN-28.
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.

Protecting the environment

– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified ca-
pacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see „Loading the
dishwasher" on page EN-17).
– Manual pre-rinsing of the dishes leads
to higher water and energy consumption
and is not recommended.
– Cleaning dishes in your appliance
generally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
Dishwasher operation
Selecting and starting the
dishwashing programme
1. Open the tap completely.
2. Switch the dishwasher on using the On/
Off button (2).
An acoustic signal sounds and the "On/
Off" display (2) lights up.
3. Select the appropriate wash programme
(see „Programme table" on page EN-21).
4. Press the programme selection button
(4) as many times as required until the
desired wash programme lights up in
the programme display (3).
5. Press the Start/Pause button (12)
start the wash programme.
While the dishwasher programme is run-
ning, the programme display (3) will flash.

Additional options

You can combine the various dishwashing
programmes with additional options. The
additional options must be selected before
starting the dishwashing programme.
to