Eval-M1-Cte620N3 Main Features - Infineon EVAL-M1-CTE620N3 User Manual

EVAL-M1-CTE620N3 User Manual
iMOTION™ Modular Application Design Kit

EVAL-M1-CTE620N3 main features

3 EVAL-M1-CTE620N3 main features
EVAL-M1-CTE620N3 is an evaluation board for motor drive applications with 3 phase IPM. Combined in a kit
with one of the available MADK control board options, it demonstrates Infineon's motion control IC and IPM
technology for motor drives.
Main features of CIPOS™ Tiny IPM IM393-X6E are:
• Integrated gate drivers and bootstrap function
• Temperature monitor
• Protection shutdown pin
• Low VCE(on) Trench IGBT technology
• Under voltage lockout for all channels
• Matched propagation delay for all channels
• 3.3V Schmitt-triggered input logic
• Cross-conduction prevention logic
• Isolation 2000V min and CTI>600
RMS
• Recognized by UL(Pending)
The evaluation board characteristics are:
• Input voltage 160~265VAC
• Maximum 1200W motor power output
• Compatble with DIP and SIP
• On board EMI filter
• Current sensing with single shunt or leg shunt
• Auxiliary power supply with 15V, 3.3V
• Overcurrent protection
• Overtemperature hardware protection
• Sensing of DC-link voltage
• Thermistor output
• Fault diagnostic output
• Measurement test-points compatible to standard oscilloscope probes
• PCB is 121 mm × 120 mm and has two layers with 35μm copper each
• RoHS complaint
User Manual 6 of 37 Revision 1.0
2018-08-23