Infineon EVAL-M1-CTE620N3 User Manual page 5

EVAL-M1-CTE620N3 User Manual
iMOTION™ Modular Application Design Kit
Introduction
The hardware circuit regarding overtemperature and overcurrent protection is also included in this power
board. The sense connection to open emitter shunt resistor is connected to the 20 pins iMOTION™ MADK-M1
interface connector. This power board is compatible with 2 packages(DIP and SIP) of CIPOS™ Tiny IPMs that
feature Integrated Power Hybrid IC with Open Emitter pins and built-in high precision temperature monitor and
over-current protection feature, along with the short-circuit rated IGBTs and integrated under-voltage lockout
function, deliver high level of protection and fail-safe operation.
Evaluation boards are not subject to the same procedures as regular products regarding Returned Material
Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are
intended to be used under laboratory conditions by technical specialists only.
User Manual 5 of 37 Revision 1.0
2018-08-23