Selecting A Programme - V-ZUG Unimatic S Operating Instructions Manual

7 Washing
7.4

Selecting a programme

«Press and go»
A main programme can be started at the press of a single button. All the
necessary settings for the programme are provided automatically.
Select or deselect any additional programmes or functions by pressing the
relevant buttons.
If no other button is pressed within the next 20 seconds, the programme
selected starts automatically.
Use the programme overview to determine which programme is the
most suitable for your washing.
Selecting main programme
Close the appliance door.
– The indicator lights for the programme buttons flash.
Press the desired programme button or press it several times for standard
programmes for cotton laundry or for the intensive programme.
– The indicator light for the programme selected illuminates.
– The selected temperature is displayed.
– After a short time the display changes to the likely duration of the wash
programme (hours/minutes).
– The indicator lights for additional programmes that may be selected
flash.
A new programme can be selected during this time. All additional
programmes selected are cancelled and must be reselected.
– If no other button is pressed within the next 20 seconds, the programme
selected starts automatically.
32