End Of Programme - V-ZUG Unimatic S Operating Instructions Manual

7 Washing
7.7

End of programme

Loosening up the washing
Shortly before the end of the programme, the washing is loosened up. This
takes about 1–2 minutes.
Press the
the loosening-up phase.
With «Automatic door opener OFF»
– When the programme has finished, the following appears in the digital
display for 20 minutes:
– The symbol flashes.
Press the or
– The appliance door opens and the washing can be unloaded.
In the event of a power failure, the appliance door can only be opened
using the emergency door release.
With «Automatic door opener ON»
• The appliance door opens automatically at the end of the programme.
• The washing can be unloaded.
With «Stop after rinsing»
The washing remains lying in the water after the final rinse. The water must be
drained off before the washing can be unloaded.
Press the button 1×.
– The washing is spun at the spin speed set for the programme selected.
Press the button 2×.
– Draining without spinning.
38
or button to unload the washing at any time during
.
button.