V-ZUG Unimatic S Operating Instructions Manual page 47

... in the display appears
xx / xxx
Possible cause
• Various situations can
lead to an «F» message.
Solution
Cancel the error message by pressing the
button.
Disconnect the power supply for about 1
minute.
Switch the power supply back on again and
select a new programme.
If the error appears again, note down the
error message in full along with the serial
number (FN).
Turn off the water tap and disconnect the
power supply.
Call Customer Services.
If there is still some washing in the appli-
ance:
Carry out emergency draining.
Use emergency door release.
Unload the washing.
Call Customer Services.
9 Trouble-shooting
47