V-ZUG Unimatic S Operating Instructions Manual page 51

... the washing is not spinning or is not being spun properly
Possible cause
• The spin speed set is too
low.
• Too unbalanced a load in
the washing drum. The
wash items cannot be
more evenly distributed.
... in the display appears
Possible cause
• Large unbalanced load in
the washing drum. The
appliance tries to improve
the distribution of the
wash load. The final spin
is extended.
... vibrating heavily when spinning
Possible cause
• The transportation lock
has not been removed.
• The feet of the appliance
are not properly adjusted.
• The load could not be
optimally balanced in the
washing drum. This is not
a malfunction.
Solution
Increase the spin speed for the next wash
cycle.
Wash large and small items together to
reduce the possibility of unbalanced loads
forming.
Solution
Wash large and small items together to
reduce the possibility of unbalanced loads
forming.
Solution
Remove transportation lock.
Optimize the appliance set-up according to
the installation instructions.
Wash large and small items together to
reduce the possibility of unbalanced loads
forming.
9 Trouble-shooting
51