Detergent Dosage; Dyeing Textiles; Selecting Programme - V-ZUG AW V6000 Operating Instructions Manual

5 Operating the appliance
5.4

Detergent dosage

Adding too much washing detergent can cause excess foaming. The con-
sequences: poor wash results, damage to the appliance in the worst case.
The correct dosage depends on the degree of soiling, the wash load, the water hardness
and the product used. Follow the manufacturer's dosing instructions.
Water hardness
Soft 0 °fH to 15 °fH
Medium 15 °fH to 25 °fH
Hard over 25 °fH
After adding the washing detergent
▸ Push the detergent dispenser drawer back in.
▸ Select a programme.
5.5

Dyeing textiles

Textiles can be dyed in the appliance using suitable dyeing agents. Follow the manufac-
turer's safety instructions and warnings.
▸ Select the desired programme (see page 18).
60
– The programme starts with brief draining; water runs into the washing
drum
▸ Open detergent dispenser drawer slightly.
▸ Add liquid dye components.
▸ Close the detergent dispenser drawer.
5.6

Selecting programme

Main wash programmes
When a programme is selected, all the necessary settings for it are assigned automatic-
ally. Additional functions can be selected or deselected by using further buttons in other
views.
▸ Close the appliance door.
– The start screen appears.
▸ Touch the button for the desired pro-
60
gramme.
– The programme selected, the expec-
ted duration, the expected pro-
gramme end time and the selectable
additional functions are displayed.
The indicator light for the selectable
▸ Touch the button.
– The programme selected starts.
18
button flashes.
The local water authorities can provide in-
formation on the level of water hardness
in your area.
60°C Coloureds
Coloureds
Select temperature
1 h 00
End 16 : 13
1200