V-ZUG Unimatic S Operating Instructions Manual page 52

9 Trouble-shooting
... at the end of the programme, the appliance door cannot be opened by
pressing the door opener button
Possible cause
• The appliance door is
stuck.
• An interruption in the
power supply.
... water sounds are heard at the end of the programme when the washing
drum is turned by hand
Possible cause
• The water that the vanes
were filled with to
compensate the unbal-
anced load could not be
completely drained
before the end of the
programme.
52
Solution
Press hard against the lock side of the
appliance door (i.e. front edge of appliance
door).
Press the or
Use emergency door release.
Solution
No action is necessary. The expelled water is
automatically pumped out and there are no
negative consequences.
button.