V-ZUG Unimatic S Operating Instructions Manual page 49

... in the display appears
Possible cause
• If there is very heavy
foaming during the wash
cycle, the programme is
automatically extended by
an additional rinsing
cycle. This improves the
wash results, but also
lengthens the duration of
the programme.
... in the display appears
Possible cause
• Hygiene recommendation.
• No wash cycle has been
carried out at a tempera-
ture of at least 60 °C for a
longer period of time.
Solution
Reduce the amount of washing detergent
used next time.
Adjust the amount of washing detergent
used to the water hardness.
Solution
With one of the next wash cycles carry out a
programme with at least 60° C.
or
Unload the washing.
Press the button 1×.
– The «Appliance hygiene» programme
starts.
9 Trouble-shooting
49