Loosening up the washing........ 31 EcoHybrid.............. 20 8.18 Soft water ............... 32 Delayed start ............ 20 8.19 EcoHybrid............... 32 5.10 OptiTime .............. 21 8.20 V-ZUG-Home............ 32 5.11 Separate rinsing/spinning........ 21 8.21 Factory settings............. 32 5.12 Washing with multi-component detergent.. 22 Demo mode 32 5.13 Correcting entry ........... 22...
Page 4
Care and maintenance 33 10.1 Cleaning intervals .......... 33 10.2 Cleaning the detergent dispenser drawer .. 33 10.3 Cleaning the water inlet filter ...... 34 10.4 Emergency draining .......... 34 10.5 Cleaning the foreign body trap ...... 35 10.6 Cleaning the drum illumination ...... 35 10.7 Opening the appliance door in the event of a power failure ............ 36 Trouble-shooting...
Safety warnings Symbols used Cleaning and user mainten- ance shall not be undertaken Denotes important safety precau- tions. by children without supervi- Failure to observe said precautions sion. can result in injury or in damage to ▪ If an appliance is not the appliance or fittings! equipped with a mains cable Information and precautions that...
1 Safety warnings ▪ Before closing the appliance door and ▪ The appliance is only to be starting a programme, ensure that there used with the recommended are no foreign objects or pets in the vaporizing medium. The use drum. of other substances may give Note on use ▪...
Page 7
1 Safety warnings ▪ Before closing the appliance door and starting a programme, ensure that there are no foreign objects or pets in the washing drum, detergent compartment or around the foreign body trap. For- eign objects such as coins, nails, paper clips, etc.
Using for the first time The appliance must be installed and connected to the electricity supply in accord- ance with the separate installation instructions. Have a qualified fitter/electrician carry out the necessary work. Transport lock Remove the transport lock (hexagon head screws at the back of the appliance) in order to avoid damage to the appliance (see installation instructions).
3 Appliance description Operating and display elements Operating panel Operating panel Buttons V-ZUG-Home display Door opener TouchDisplay EcoManagement Indicator lights EcoHybrid Standard and extra programmes Start/Pause/Drum illumination End of programme / Fast forward Favourites TouchDisplay Buttons Coloureds Textile programmes Select temperature Whites 95 °C...
4 Programme overview Indicator lights Indicator light Activity State Indicator light is il- Function is active. luminated. Indicator light is Function is selectable. flashing. Indicator light is Function is not selectable. not illuminated. Button state Background colour Symbol colour State Blue White Function is active.
4 Programme overview Textile programmes Touch the button for the selection of textile programmes. Programmes Load capacity Coloureds: Standard programme 1–8 kg Woollens: Gentle treatment for woollens and other delicate textiles. 1–2.5 kg Only for woollens with a felt-free finish and labelled as «machine washable».
4 Programme overview Programmes Load capacity Black garments: Optimized rinsing through a higher water level and 1–4 kg extended rinsing time for dark textiles. Black hand wash: Optimized rinsing through a higher water level 1–2 kg and extended rinsing time for dark textiles labelled with the fabric care symbol.
4 Programme overview Additional functions Whenever a programme is selected, the selectable additional functions are displayed. Additional functions Load capacity EcoHybrid: The appliance is equipped with two heating systems: ▪ Heat pump heater (approximately 1 kW heat output) with very low energy consumption. Suitable for heating up to 50 °C. ▪...
Page 14
4 Programme overview Additional functions Load capacity Degree of soiling: Adjustment to the degree of soiling of the wash- ing. Light soiling: For lightly soiled washing. Normal soiling: Extended wash time. Heavy soiling: Extended wash time, higher water level, an additional rinsing cycle.
4 Programme overview Additional functions Load capacity Bio wash: The programme sequence is adapted for the use of multi-component detergents (alkaline detergent + bleach) (see page 22). Soap washing The programme sequence is adapted for the use of multi-component detergents (softener + soap detergent) (see page 22).
5 Operating the appliance Operating the appliance Preparations ▸ Check the foreign body trap is inserted correctly (see page 35). ▸ Insert the mains plug into a mains socket. ▸ Turn on water tap. ▸ Touch the button to open the appliance door. Loading the washing ▸...
5 Operating the appliance Adding washing detergent Liquid detergent ▸ Pull the detergent dispenser drawer out as far as it will go. ▸ Pull flap 1 upwards and out of position a and insert in position b. Do not fill liquid detergent past the upper mark. Liquid detergent can only be used for the main wash with programmes without a pre-wash.
5 Operating the appliance Detergent dosage Adding too much washing detergent can cause excess foaming. The con- sequences: poor wash results, damage to the appliance in the worst case. The correct dosage depends on the degree of soiling, the wash load, the water hardness and the product used.
5 Operating the appliance Textile programmes ▸ Touch the button. Textile programmes – The selection of textile programmes appears in the TouchDisplay. Coloureds Woollens ▸ Touch the button repeatedly until the de- sired textile programme is displayed. Hand wash Shirts ▸...
5 Operating the appliance EcoHybrid ▸ Touch the button while the indicator light EcoHybrid is flashing. – The «EcoHybrid» menu appears in Optimal energy efficiency the TouchDisplay. Very good ▸ Touch the button for the desired Eco- energy efficiency Hybrid setting. Good energy efficiency –...
5 Operating the appliance 5.10 OptiTime The option «Programme end, OptiTime on» must be enabled in the user settings under «Delayed start / OptiTime» (see page 31). ▸ Touch the button for the desired pro- gramme. ▸ Touch the button. Progr.
5 Operating the appliance 5.12 Washing with multi-component detergent To start Bio or Soap wash, «Multi-component detergent» must be enabled in the user set- tings (see page 31). Ensure the alkaline detergent or soap detergent are added to the correct compartment (see page 17). ▸...
5 Operating the appliance 5.15 With childproof lock activated Selecting programme How to turn the childproof lock on/off is described in «User settings». ▸ Close the appliance door. Childproof lock – The input field for the code appears 0 0 0 Code in the TouchDisplay.
5 Operating the appliance 5.17 Opening the appliance door during washing The appliance door can be opened when the indicator light for the button is illumin- ated. ▸ Touch the button. – The appliance door opens. Laundry can be added or removed. ▸...
Page 25
5 Operating the appliance Stop after rinsing The washing remains lying in the water after the final rinse. The water must be drained off before the washing can be unloaded. ▸ Touch the button 1x. – The washing is spun at the spin speed set for the programme. –...
5 Operating the appliance 5.19 EcoManagement Only active if «EcoManagement» is turned on in the user settings (see page 31). Displaying estimate during programme selection The expected energy and water consumption can be displayed during additional function selection. ▸ Touch the desired programme. 60°Coloureds 1 h 15 –...
6 Favourites Favourites Simple start to frequently used programmes. Defining favourites ▸ Touch the button. – The appliance door opens. ▸ Touch the button. ▸ Touch one of the favourite buttons. empty ▸ Select programme and additional func- tions. ▸ Touch the button. ▸...
7 V-ZUG-Home Deleting favourites ▸ Touch the button. – The appliance door opens. ▸ Touch the button. ▸ Touch the favourite programme to be 60°C deleted. ▸ Touch the button. Clear – The favourite programme is cleared. Starting favourites ▸ Close the appliance door.
8 User settings User settings Providing no programme is running and no error messages are displayed, the user settings can be changed. Customizing user settings ▸ Close the appliance door. Extra ▸ Touch the button. 40° Standard Steam anti-cr. – The «Extra» menu appears in the Proofing 60°...
8 User settings Date and time Time and date must be reset after the power supply ▪ Automatic summer/winter has been interrupted for about 5 weeks. The appli- time on ance must not be disconnected from the mains sup- ▪ Automatic summer/winter ply for at least 30 minutes after making the settings.
8 User settings 8.11 Delayed start / OptiTime When the «Programme start» function is turned on, ▪ Programme start the time a programme should start running can be ▪ Programme end, OptiTime defined. ▪ Programme end, OptiTime When the «Programme end» function is turned on, off (factory setting) the time a programme should end can be defined.
8.19 EcoHybrid There are 3 settings for energy efficiency. ▪ Optimal ▪ Very good ▪ Good 8.20 V-ZUG-Home Your appliance is networkable. ▪ Operate and display ▪ Display ▪ Off (factory setting) You can find further information under www.vzug.com. 8.21 Factory settings The factory settings can be restored.
10 Care and maintenance Switching off ▸ Touch the button. – The appliance door opens. ▸ Hold the buttons depressed at the same time. – The «Demo mode» menu appears in the TouchDisplay. ▸ Touch the button. – The demo mode is not selected. ▸...
10 Care and maintenance 10.3 Cleaning the water inlet filter Test the water inlet for leaks following maintenance work. ▸ To avoid blockages, periodically check and, if necessary, clean the water inlet filter 1. 10.4 Emergency draining The water in the appliance may be hot. Scalding hazard! Allow to cool down before emergency draining.
10 Care and maintenance 10.5 Cleaning the foreign body trap Clean the foreign body trap at regular intervals as well as after washing, for in- stance, pet blankets or other wash items that cause a thick build-up of fluff. ▸ Open the appliance door. ▸...
10 Care and maintenance 10.7 Opening the appliance door in the event of a power failure Wait until the washing drum is completely stationary. A washing drum that is still rotating poses a risk of serious injury. ▸ Close the water tap and disconnect the appliance from the mains. ▸...
11 Trouble-shooting Trouble-shooting You may be able to trouble-shoot the following malfunctions yourself. If not, note down the error message in full (message, F and E numbers) and call Customer Services. 11.1 Error messages Display Possible cause Solution ▪ The foreign body trap is ▸...
Page 38
11 Trouble-shooting Display Possible cause Solution FXX/EXX ▪ Various situations can ▸ Touch the button. lead to an "F" message. see instructions ▸ Switch the power supply off for SN XXXXX XXXXXX about 1 minute. ▸ Switch the power supply back on again and select a new programme.
11 Trouble-shooting Display Possible cause Solution Hygiene recom- ▪ No wash cycle has ▸ With one of the next wash cycles mendation been carried out at a carry out a wash with at least 60° C. temperature of at least 60 °C for a longer period of time.
Page 40
11 Trouble-shooting Problem Possible cause Solution At the end of the ▪ The appliance door is ▸ Press hard against the lock area of programme, the stuck. the appliance door (i.e. front edge of appliance door appliance door). cannot be opened ▸...
11 Trouble-shooting Problem Possible cause Solution The consumption ▪ The values can vary ac- ▸ Observe the user settings and addi- values for Eco- cording to programme, tional functions. Management dis- load, additional func- played are too tions and user settings. high.
Page 42
11 Trouble-shooting Result Possible cause Solution Grey residue on ▪ Grease and dirt ▸ Increase detergent dosage. washing particles left behind. ▸ Use heavy-duty washing detergent. ▪ Residue from detergent, ▸ Adjust amount of detergent to water limescale and dirt hardness and degree of soiling of washing (see page 18).
Page 43
12 Spare parts Result Possible cause Solution Holes, rips or ▪ Items in the wash with ▸ Fasten zip fasteners and hooks be- tears zips or hooks open. fore washing. ▸ Wash delicates in a laundry bag or pillow case. ▸...
13 Technical data Technical data Dimensions Height 85 cm Width 59.5 cm Depth 62.5 cm Weight 89 kg Pumping height of pump 1.2 m Load capacity 8 kg dry washing Plumbing in Connection to water supply Cold water G¾" Permitted pressure of water sup- 0.1–0.6 MPa (1–6 bar) Max.
13 Technical data 13.3 Consumption values The consumption data and programme times given serve only as a guide. They refer to the maximum load capacity and can vary with, for instance, towelling material, a very cold water feed, the degree of soiling selected or a smaller wash load. The time remain- ing shown and the programme end time are adjusted accordingly.
Factory setting 13.4 Product fiche In accordance with EU Regulation No. 1061/2010 Brand V-ZUG Ltd The model identifier corresponds to the first alphanu- 11025 merics on the identification plate. Rated capacity for cotton laundry at full load Energy Efficiency Class...
13 Technical data In accordance with EU Regulation No. 1061/2010 Programme time of the standard 60 °C cotton pro- gramme at full load Programme time of the standard 60 °C cotton pro- gramme at partial load Programme time of the standard 40 °C cotton pro- gramme at partial load Duration of the left-on mode Airborne acoustical noise emissions during washing...
14 Washing tips Washing tips 14.1 Energy and water economy ▪ Where possible fill the drum to the maximum load capacity of the relevant pro- gramme. ▪ Select «Pre-wash» or «Soaking» only for washing that is heavily soiled or stained. ▪...
Page 49
15 Disposal Disposal 15.1 Packaging Never allow children to play with packaging material due to the danger of injury or suffocation. Store the packaging material in a safe location or dispose of it in an environmentally-friendly way. 15.2 Safety Render the appliance unusable to prevent accidents caused by improper use (e.g. through children playing): ▸...
Page 52
Underwear Textile programmes ........ 11 Using for the first time........8 Validity..............2 VAS Vibration Absorbing System ....47 V-ZUG-Home..........9, 28 Warranty extensions ........55 Washing efficiently Standard programmes........ 12 Water hardness ..........18 Whites programme ........9, 10 Consumption values ........
Page 55
V‑ZUG service centre. Technical questions, accessories, warranty extensions V-ZUG is happy to help you with any general administrative or technical queries, to take your orders for accessories and spare parts and to inform you about our progressive service agreements.
Page 56
▸ Press the button. Programme starts. When programme has finished ▸ Press the button and unload the laundry. ▸ Clean detergent dispenser drawer. ▸ Push appliance door to, but do not close. 1063865-R02 V-ZUG Ltd, Industriestrasse 66, CH-6302 Zug info@vzug.com, www.vzug.com...
Need help?
Do you have a question about the AdoraWash V6000 and is the answer not in the manual?
Questions and answers