9 Trouble-shooting
... in the display appears
/
Possible cause
• Faulty electrical connec-
tion.
• Overvoltage
... in the display appears
Possible cause
• The childproof lock is
switched on.
48
Solution
Cancel the error message by pressing the
button.
Disconnect the power supply for about 1
minute.
Switch the power supply back on again and
select a new programme.
If the error appears again:
disconnect the power supply.
Have an electrician check the house instal-
lation.
If the error appears again:
note down the error message in full and the
serial number (FN) and then disconnect the
power supply.
Call Customer Services.
Inform the caretaker, the owner of the appli-
ance or the property management
company.
Solution
Refer to the section on how to operate the
appliance with the childproof lock activated.
Switch off the childproof lock.