V-ZUG Unimatic S Operating Instructions Manual page 50

9 Trouble-shooting
... the programme takes significantly longer than indicated in the display
Possible cause
• Too much washing deter-
gent. Lengthening the
rinsing time.
• Large unbalanced load in
the washing drum.
• Inlet water very cold.
Heating is extended.
... in the display appears
Possible cause
• Inlet water very cold.
Heating is extended.
... in the display appears
Possible cause
• Selected programme is
intended for a reduced
washing load. If there are
too many articles, heating
and possibly also the
rinsing will be extended.
50
Solution
Reduce the amount of washing detergent
used next time.
Wash large and small items together to
reduce the possibility of unbalanced loads
forming.
Solution
Solution
With the next wash cycle adjust the amount
of articles to the max. washing load (see
'Programme overview').