Selecting A Programme - V-ZUG UnimaticWash V4000 Operating Instructions Manual

Table of Contents

Advertisement

Dyeing textiles
Textiles can be dyed in the appliance using suitable dyeing agents. Please follow the
manufacturer's safety instructions and warnings carefully.
Each wash programme starts with brief draining and for this reason liquid dye
components should be added after this.
After adding the washing detergent
▸ Push the detergent dispenser drawer back in.
▸ Select programme.
5.4

Selecting a programme

«Press and go»
A main programme can be selected at the touch of a single button. All the necessary
settings for the programme are provided automatically.
Select or deselect any additional programmes or additional functions by touching the
corresponding button.
If no other button is touched within the next 20 seconds, the programme selected starts
automatically.
Use the programme overview to determine which programme is the most suitable
for your washing.
Selecting main programme
▸ Close the appliance door.
– The indicator lights for the programme buttons flash.
Touch the desired programme button (touch
– The indicator light for the programme selected illuminates.
– The programme selected, the likely duration (hours/minutes) and the programme
end time are displayed.
– The indicator lights for additional programmes that may be selected flash.
A new programme can be selected during this time. All additional programmes se-
lected are cancelled and must be reselected.
– If no other button is touched within the next 20 seconds, the programme selected
starts automatically.
or
1× or more).
5 Washing
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

11020

Table of Contents