Additional Functions - V-ZUG Unimatic S Operating Instructions Manual

5 Programme overview
5.4

Additional functions

Function/Symbol
Temperature setting
Spin speed
Delayed start
Fast forward /
End of programme
Pause / Door opener*
* Depending on the serial number (FN)
22
The temperature can be changed in steps of
10 °C or 15 °C, allowing slightly soiled (not
stained) textiles to be washed with a saving in
energy.
Cold wash: Not heated
The spin speed can be changed in steps of 200
rpm (1200, 1000, 800, 600, 400 rpm, stop after
rinsing, 1500,1400 rpm). Delicates can thus be
spun at a low spin speed. However, this increases
the drying time (greater energy consumption for
tumble drying).
Take advantage of cheap-rate electricity (setting
range of up to 24 hours). When the delayed start
time set is reached, the programme starts auto-
matically.
Press the button to skip individual parts of a
programme at any time during the programme
sequence.
Pressing the
running will cause the programme to pause.
Pressing the
appliance door to open provided the appliance is
in a state that allows this action (depends on the
water level, temperature, speed).
Press the flashing main programme button to end
the pause and resume the programme.
Uses
button 1× when a programme is
button again will cause the