V-ZUG Unimatic S Operating Instructions Manual page 53

Hide thumbs Also See for Unimatic S:
Table of Contents

Advertisement

... traces of washing detergent left behind in the washing detergent
compartment
Possible cause
• Damp or lumpy washing
detergent.
• The washing detergent
compartment was damp
and a delayed start was
selected.
• The water flow pressure
is too low.
• The water inlet is scaled
up.
• The flap for liquid deter-
gent was used.
... traces of fabric conditioner or water left behind in the fabric conditioner
compartment
Possible cause
• The siphon in the fabric
conditioner compartment
is missing or is not in
place correctly.
• The siphon or suction
tube is clogged.
Solution
Store washing detergent in a dry place.
Wipe the washing detergent compartment
dry before adding the detergent.
Open water tap fully.
Check the water supply and, if necessary,
clean the filter.
Clean the nozzles above the detergent
dispenser drawer.
Remove the flap and put in storage posi-
tion.
Solution
Ensure the siphon is in place correctly.
Clean the siphon and suction tube.
9 Trouble-shooting
53

Advertisement

Table of Contents
loading

Table of Contents