Table of Contents
Advertisement
Other indicators of the display:
Symbol
/
4.3 Heat up indicator
If you turn on the heating function,
appears. The bars show that the
temperature in the oven increases or
decreases.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
To set the Time of day refer
to "Clock functions"
chapter.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and
cleaning" chapter.
Clean the oven and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Preheating
Preheat the empty oven to burn off the
remaining grease.
6. DAILY USE
WARNING!
Refer to Safety chapters.
Name
h / min
Heat-up / residual heat indica-
tor
Temperature / fast heat up
Temperature
Minute minder
Description
A clock function operates.
Shows the temperature level in the appli-
ance.
The function operates.
You can examine or change the tempera-
ture.
The minute minder function operates.
When the oven is at the set temperature,
the bars go off the display.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if
applicable.
1. Set the function
temperature to 250ºC.
Let the appliance operate for 1 hour.
2. Set the function
temperature to 250ºC.
Let the appliance operate for 15
minutes.
3. Set the function
temperature to 250ºC.
Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
ENGLISH
9
and the
and the
and the
Advertisement
Table of Contents
