Using The Accessories - AEG DUK731110M User Manual

14 www.aeg.com
4. Press
function.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Press a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.7 Setting: Minute Minder
1. Press
The display shows flashing
2. Press
First you set the seconds, then the
minutes and the hours.
3. Press
MINDER and

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
8.1 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support .
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
to set the SET+GO
and with an
.
and "00".
to switch between options.
or to set the MINUTE
to confirm.
4. Press or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes and the display
shows flashing 00:00 and
5. Press a sensor field to stop the
signal.
7.8 COUNT UP TIMER
1. To reset the Count Up Timer press:
and at the same time .
2. When the display shows "00:00" the
Count Up Timer starts to count up
again.
Wire shelf and deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
.