Table of Contents
Advertisement
30
www.aeg.com
Problem
The display shows an error
code that is not in this table.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
13. ENERGY EFFICIENCY
13.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conven-
tional mode
Energy consumption with a standard load, fan-forced
mode
Number of cavities
Possible cause
There is an electrical fault.
The demo mode is activa-
ted.
on the front frame of the oven cavity. Do
not remove the rating plate from the
oven cavity.
.........................................
.........................................
.........................................
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Refer to "Using the settings
menu" in "Additional func-
tions" chapter.
AEG
DUK731110M
Top oven: 105.6
Main oven: 95.9
Top oven: A
Main oven: A
Top oven: -
Main oven: 0.85 kWh/cycle
Top oven: 0.75 kWh/cycle
Main oven: 0.71 kWh/cycle
2
Advertisement
Table of Contents
