Table of Contents
Advertisement
Problem
The lamp does not work.
The display shows 00:00.
If the display shows an error code that is
not in this table, turn the house fuse off
and on to restart the appliance. If the
error code recurs contact an Authorised
Service Centre.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
13. ENERGY EFFICIENCY
13.1 Product Information for power consumption and maximum time to
reach applicable low power mode
Power consumption in standby
Maximum time needed for the equipment to automatically reach the applicable low power mode
13.2 Energy saving tips
Following tips below will help you save
energy when using your appliance.
Make sure that the appliance door is closed
when the appliance operates. Do not open
the appliance door too often during cooking.
Keep the door gasket clean and make sure it
is well fixed in its position.
Use metal cookware and dark, non-reflective
tins and containers to improve energy saving
(only when you use a non-microwave
function).
Do not preheat the appliance before cooking
unless specifically recommended.
Keep breaks between baking as short as
possible when you prepare a few dishes at
one time.
Cooking with fan
When possible, use the cooking functions
with fan to save energy.
Check if...
The lamp is burnt out.
There was a power cut. Set the time of day.
The necessary data for the service centre is
on the rating plate. The rating plate is located
on the front frame of the appliance. It is
visible when you open the door. Do not
remove the rating plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
Residual heat
When the cooking duration is longer than 30
min, reduce the appliance temperature to
minimum 3 - 10 min before the end of
cooking. The residual heat inside the
appliance will continue to cook.
Use the residual heat to keep the food warm
or warm up other dishes.
When you turn off the appliance, the display
shows the residual heat.
Keep food warm
Choose the lowest possible temperature
setting to use residual heat and keep the food
warm. The residual heat indicator or
temperature appears on the display.
Cooking with the lamp off
Turn off the lamp during cooking. Turn it on
only when you need it.
0.8 W
20 min
ENGLISH
21
Advertisement
Table of Contents
