Table of Contents
Advertisement
MB-280-02
Brake Interlock Switch
Sit in the operator position, turn the start switch ON, select a direction, and slowly press the throttle
pedal.
• The vehicle should operate normally.
While operating at a slow speed; press the brake pedal with your left foot.
• The motor control system should turn off and a DTC should be displayed on the dash
display.
Charger Interlock Switch
Connect the charger to its power source. If using a portable charger, connect the charger cable
to the vehicle.
Sit in the operator position, turn the start switch ON, select a direction, and slowly press the throttle
pedal.
• The vehicle should not operate.
Disconnect the charger and wait 1 minute.
Sit in the operator position, turn the start switch ON, select a direction, and slowly press the throttle
pedal.
• The vehicle should operate normally.
Operator Manual
Page 43
Advertisement
Table of Contents
