Brake Fluid - Taylor-Dunn TC-080-120 Operator's Manual

Table of Contents

Advertisement

Brake Fluid

WARNING
• Only use DOT 4 brake fluid from a new sealed container.
• DOT 4 brake fluid is corrosive and will damage paint finishes.
• Dispose of brake fluid in accordance with local state and federal regulations.
• Read and follow all warnings on the brake fluid container.
Periodically visually inspect the brake fluid level in the master cylinder. Low fluid level could result
in diminished and/or loss of braking power.
Refer to the maintenance schedule in this manual for the recommended inspection interval.
The master cylinder is located in the engine compartment.
WARNING
1) Park the vehicle on a level surface in an area approved for servicing a vehicle.
2) Set the park brake.
3) Place the transmission lever in Park. If Park is not available, place the transmission
in Neutral and place blocks on the wheels to prevent vehicle movement.
3. Thoroughly clean the area around the master cylinder before removing the master cylinder
cap.
4. Remove the cap.
5. The fluid in both reservoirs should be within 1/4 inch (6 mm) of the shoulder at the front of
the reservoir. Refer to illustration.
Page 48
MT-080-120-G
TC-080-120 Operator Manual

Advertisement

Table of Contents
loading

Table of Contents