Fluid Levels; Engine Oil - Taylor-Dunn TC-080-120 Operator's Manual

FLUID LEVELS

Engine Oil

Taylor-Dunn does not recommend the use of oil additives.
The location of the engine oil dipstick will vary depending
on the engine installed in your vehicle.
Before checking engine oil level: Turn engine off and wait
10 minutes to allow oil to return to the oil pan.
Oil level should be between the ADD and FULL marks
on the dipstick.
Only add oil if level is BELOW the add mark on the
dipstick.
Only use oil displaying the appropriate American
Petroleum Institute (API) Symbol on the container.
Oil type and capacities
Engine
Perkins 1104
Cummins B3.3
PSI GM 3.0
KEM GM 4.3L
Ford LRG/DSG/MSG
Ford ESG
Recommended Viscosity
Engine
Perkins
Cummins
Ford LRG/ESG
Ford MSG.DSG
GM (KEM and PSI)
Page 42
Capacity
Type API (quart/liter)
CH-4 11/10.4
CH-4 8/7.5
SJ or SH 4.5/4.25
SJ or SH 4.5/4.25
SJ or SH 4.5/4.25
SJ or SH
Temp (°C) Temp (°F)
-40 to 10 -40 to 50
-40 to 30 -40 to 86
-40 to 40 -40 to 104
-30 to 30 -22 to 86
-30 to 40 -22 to 104
-20 to 40 -4 to 104
-10 to 50 14 to 122
-40 to 20 -40 to 68
-25 o 20 -13 to 68
-10 to 50 14 to 122
All Temp's
All Temp's
All Temp's
-18 to 50 0 to 122
-25 to 0 -13 to 32
6/6
Viscosity
0W20
0W30
0W40
5W30
5W40
10W30
15W40
5W30
10W30
15W40
5W20
5W30
5W20
10W30
5W30
MT-080-120-G
TC-080-120 Operator Manual