Table of Contents
Advertisement
19 WARRANTY
Elcometer NDT warrants your gauge against defects in materials and workmanship for a period of
two years from receipt by the end user.
Additionally, Elcometer NDT warrants transducers and accessories against such defects for a
period of 90 days from receipt by the end user. If Elcometer NDT receives notice of such defects
during the warranty period, Elcometer NDT will either, at its option, repair or replace products that
prove to be defective. The warranty will be invalidated if the instrument has been opened.
19.1 EXCLUSIONS
The above warranty shall not apply to defects resulting from: improper or inadequate maintenance
by the customer; unauthorised modification or misuse; or operation outside the environmental
specifications for the product.
Elcometer NDT makes no other warranty, either express or implied, with respect to this product.
Elcometer NDT specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Some states or provinces do not allow limitations on the duration of an implied
warranty, so the above limitation or exclusion may not apply to you. However, any implied warranty
of merchantability or fitness is limited to the two-year duration of this written warranty.
This warranty gives you specific legal rights, and you may also have other rights, which may vary
from country to country, state to state or province to province.
19.2 OBTAINING SERVICE DURING WARRANTY PERIOD
If your hardware should fail during the warranty period, contact Elcometer NDT and arrange for
servicing of the product. Retain proof of purchase in order to obtain warranty service.
For products that require servicing, Elcometer NDT may use one of the following methods:
•
Repair the product
•
Replace the product with a re-manufactured unit
•
Replace the product with a product of equal or greater performance
•
Refund the purchase price.
19.3 AFTER THE WARRANTY PERIOD
If your hardware should fail after the warranty period, contact Elcometer NDT for details of the
services available, and to arrange for non-warranty service.
20 SPARES & ACCESSORIES
20.1 TRANSDUCERS
Elcometer NDT gauges are not supplied with a transducer as standard - this must be ordered
separately.
The transducers listed below are the most commonly used however, Elcometer NDT offer a wide
range of other transducers to suit various applications.
Further information on the transducers available and their applications can be found on the
Elcometer NDT Knowledge Centre on www.elcometerndt.com.
Description
2.25 MHz 1/4" Potted Side Transducer
5 MHz 1/4" Potted Side Transducer
5 MHz 1/4" Potted Side High Damped Transducer
7 MHz 1/4" Potted Side High Damped Transducer
10 MHz 1/4" Potted Side Transducer
Dual Lemo to Single Microdot Transducer Cable
Sales Part No.
TX2M25CP-2
TX5M00CP-4
TX5M00CP-10
TX7M50CP-6
TX10M0CP-4
TL-24030-8
29
Advertisement
Table of Contents
