Elcometer CG100ABDL Operating Instructions Manual page 2

Corrosion gauge
Table of Contents

Advertisement

This product meets the Electromagnetic Compatibility Directive.
The product is Class A, Group 1 ISM equipment according to CISPR 11
Group 1 ISM product: A product in which there is intentionally generated and/or used conductively
coupled radio-frequency energy which is necessary for the internal functioning of the equipment
itself.
Class A product are suitable for use in all establishments other than domestic and those directly
connected to a low voltage power supply network which supplies buildings used for domestic
purposes.
These operating instructions are available for download on our website www.elcometerndt.com.
The following trademark is a registered trademark of Elcometer Limited, Edge Lane, Manchester,
M43 6BU. United Kingdom:
Material Safety Data Sheets for the ultrasonic couplant supplied with the instrument and available
as an accessory, are available to download via our website:
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant.pdf
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf
All other trademarks acknowledged. © Elcometer Limited 2011/2012. All rights reserved. No part of
this document may be reproduced, transmitted, transcribed, stored (in a retrieval system or
otherwise) or translated into any language, in any form or by any means (electronic, mechanical,
magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.
TMA-0559 Issue 01
Text with cover: 23807
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cg100bdlCg100b

Table of Contents