Table of Contents
Advertisement
Note: Once the file is open, it will remain open until it is closed or another file is opened. If the
gauge is switched off, the file will be opened automatically when the gauge is switched on
again. Press the ENTER key to display the file from the measurement screen.
2. If you want to save the reading to a particular cell location, scroll to the desired cell.
Note: The cell location must be empty. If it already contains a reading and you want to save a
new reading to the same location, refer to the instructions given in "Viewing and Deleting
readings" on page 24.
3. Take a reading and then press ENTER.
The reading value is saved in the file at the location selected and the cursor advances to the
next cell according to the rules set for the data logger file:
•
Grid log data file only: If INCR. DIR is set to NORTH, EAST, SOUTH or WEST, the cursor
will advance one cell in the chosen direction. When the cursor reaches the last cell in the
row or column it will return to the other end of the row or column.
•
Sequential log data file only: If DIRECTION is set to INC or DEC, the cursor will advance
one cell in the chosen direction. When the cursor reaches the last cell in the column it will
return to the other end of the column.
Note: If you try to save a reading into a cell location which already contains a reading value, a
warning message is displayed (see Deleting a reading).
4. Grid log data file only: To advance to a specific row number, press OK enter the row number.
Press OK to advance directly to that row number in the grid log.
5. To toggle the display between DIGITS view and B-SCAN view, press ESC.
6. If you are unable to take a measurement due to the measurement location being physically
inaccessible, press CLR.
The cell location in the data file is marked OBST (Obstruct).
7. The display of the log data file on the measurement screen can be switched on and off:
•
To switch off, press MEAS
•
To switch on, press ENTER
13.6 VIEWING AND DELETING READINGS
With a data file open:
1. Use the arrows to scroll through the cells in the data file.
As the cursor is moved to a different cell, the display is updated with the display view saved
with the reading (if SAVE GRAPHICS was set to YES). Readings stored in memory are
indicated by MEM in the top left corner of the measurement screen (in place of the bars of the
stability indicator).
2. To delete a reading, scroll to the cell location, press CLR and then OK (or ESC to cancel).
The reading is deleted and if you wish you can now take another measurement and save the
reading in this cell location.
13.7 EDITING A DATA LOGGER FILE
You can edit the following fields of data files:
•
Grid files: NAME, NOTE, and INCRement DIRection
•
Sequential files: NAME, NOTE, DIRECTION and LOG SIZE
To edit a file:
1. Open the data file.
2. EDIT and press ENTER.
The EDIT GRID LOG (or EDIT SEQ LOG) screen is displayed and lists all the fields which can
be edited.
3. Scroll to the field you want to edit, press ENTER and then adjust the contents of the field using
the techniques previously described to create a data file - see page 23 and page 23.
4. When finished, scroll to SAVE CHANGES, press ENTER and then OK (or ESC to cancel).
24
Advertisement
Table of Contents
