Elcometer CG100ABDL Operating Instructions Manual page 8

To see the measurement screen, press MEAS.
To select which measurement screen to use, press MENU/DISP/VIEW and then select RF, RECT,
B-SCAN or DIGITS.
5.1 ITEMS COMMON TO ALL MEASUREMENT SCREENS
A number of items are common to all the measurement screens:
A Battery Icon
B Repeatability/Stability
Indicator
C Material Thickness
Value/
Material Velocity Value
D Units
E Feature Status Bar
F Measurement View Area RF, RECT, B-SCAN or DIGITS view area.
G Measurement Labels
Bar
H Hot Menu (ABDL gauges
only)
A
B
E
F
G
H
Remaining battery life.
This indicator is used in conjunction with the digital thickness
values displayed. When all the vertical bars are fully illuminated
and the last digit on the digital thickness value is stable, your
gauge is reliably measuring the value.
The thickness or sound velocity of the material under the
transducer (type depends upon measurement view)
The current measurement units (Metric/English).
Indicates the features currently enabled and in use:
• Measurement Mode (P-E, PECT, PETP, E-E, E-EV, CT)
• Differential Mode (ON/OFF)
• High Speed Scan Mode (ON/OFF)
• Alarm Mode (ON/OFF/AUDIBLE)
• Gain Setting (VLOW, LOW, MED, HI, VHI) CG100B &
CG100BDL
• Gain Value - CG100ABDL only
See "Measurement - Modes" on page 10 etc for further
information
Displays the viewable range and are based on the values of
DELAY/B-START and RANGE/B-DEPTH
The hot menu contains a selection of the most commonly used
options, allowing you to conveniently adjust these to your needs
while the graphical display is active
C
D
7