Table of Contents
Advertisement
2.25 MHz 1/4" Microdot Side Mini Angle Beam Transducer, 45 Degree
5 MHz 3/8" Microdot Side Mini Angle Beam Transducer, 60 Degree
10 MHz 3/16" Microdot Side Mini Angle Beam Transducer, 70 Degree
Calibration blocks
Elcometer NDT offer a comprehensive range of calibration blocks to suit a wide range of
applications and standards.
Selecting the correct calibration block for the application is essential to ensure accurate evaluation.
The form, shape and material of the calibration block should be appropriate for the material being
inspected. Any artificially induced flaw should closely resemble that of the actual flaw being tested
for.
The calibration blocks listed below are a selection of those available - details of the full range can
be found on www.elcometerndt.com.
Description
Calibration Block: 8 Step; 1 - 8mm
Calibration Block: 10 Step; 2 - 20mm
Calibration Block: 10 Step; 2.5 - 25mm
Replace * with S1018 = 1018 Steel Block; A = Aluminium Block; SS = Stainless Steel Block;
T = Titanium Block.
20.2 ULTRASONIC COUPLANT
Each gauge is supplied with a 120ml (4oz) bottle of standard ultrasonic couplant. Replacement
bottles and couplant for high temperature applications are available from your local Elcometer NDT
supplier or directly from Elcometer NDT.
Description
Ultrasonic Couplant, 120 ml (4 oz)
Ultrasonic Couplant, 360 ml (12 oz)
Note: A wide range of other transducers and accessories is available - see www.elcometerndt.com
for details.
20.3 MISCELLANEOUS
Description
RS232 Cable USB to Serial Converter
21 CONDITION AND PREPARATION OF SURFACES
Further
information
www.elcometerndt.com.
22 APPLICATION
Further
information
www.elcometerndt.com.
can
be
found
on
can
be
found
on
the
Elcometer
NDT
the
Elcometer
NDT
TF2M25C45M
TF5M00D60M
TF10M0B70M-1
Sales Part No.
TW-24005-*
TW-24006-*
TW-24007-*
Sales Part No.
TC-24034-1
TC-24034-2
Sales Part No.
TL-24031
Knowledge
Centre
Knowledge
Centre
on
on
30
Advertisement
Table of Contents
