Mounting; Panel Mounting - Winmate W07FA3S-PCO1AC-POE Quick Start Up Manual

MOUNTING

S-series HMI devices come with different mounting options suitable
for most of the industrial and commercial applications.

Panel Mounting

Panel / Flush Mounting solution allows installing the HMI device onto
the wall.
Wall Cutout
131.4 x 175.4 mm
Mounting Instruction
1. Prepare a fixture for the specific dimensions of the device.
2. Cut a hole on a sub frame or panel according to the cutout
dimensions.
3. Install the device properly onto the cutout area of the sub frame or
panel with the sides of the front bezel.
4. Fix the device to fixture with eight M3 screws.
Screw Hole Diameter
M3x4 mm
- 27 -