Summary of Contents for Winmate W07FA3S-PCM1AC-PoE
Page 1
7"S-Series HMI W07FA3S-PCM1AC-PoE (with LED light bar) W07FA3S-PCM1-PoE (without LED light bar) Slim-line User Manual Version 1.1 Document Part Number: 9171111I102D...
Preface Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners.
Page 3
Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance.
Page 4
Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. NOTE: A note is used to emphasize helpful information IMPORTANT:...
Safety Information WARNING! / AVERTISSEMENT! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez sur celui-ci.
Page 6
CAUTION/ATTENTION Do not cover the openings! Ne pas couvrir les ouvertures! Before connecting the equipment to the power outlet make sure the voltage of the power source is correct. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
Page 7
WARNING!/ AVERTISSEMENT! Always ground yourself against electrostatic damage to the device. Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge pas sur vous. Cover workstations with approved anti-static material. Use a wrist strap connected to a work surface and properly grounded tools and equipment. ...
Important Information Countries/ Area Symbol This equipment complies with essential requirements of: FCC Part 15 Subpart B Regulations Class B European Union Electromagnetic Compatibility Directive(2014/30/EU) Low Voltage Directive (2014/35/EU) Restrictions of the use of certain hazardous substances (RoHS) Directive (2011/65/EU) Federal Communications Commission Radio Frequency Interface Statement This device complies with part 15 FCC rules.
Page 9
également conforme aux directives du Conseil européen [D]. [Other languages] Other languages are available upon request. Refer to Certificates for the original document. Revision History Version Date Note Author 17-Mar-2016 Initial release Bill Yeh 25-Jul-2016 Winmate Home Manager AP Bill Yeh...
Page 11
3.4.1 Configuring Ethernet ....................20 3.4.2 Checking Ethernet ....................20 3.5 Testing LED Light Bar ......................21 Winmate® Home Manager (WHM) ................21 3.6.1 How to Lock Applications ..................22 3.6.2 How to Reset WHM ....................24 3.7 Using Front Camera ......................26 3.7.1 The Camera Menu ....................
Page 12
6.1 Introduction ........................57 6.1.1 Winmate Download Center ..................57 6.1.2 Winmate File Share ....................57 6.1.3 Android Debug Bridge (ADB) ................... 58 6.2 Problem Report Form ......................59 7 Certificates ..........................61 7.1 FCC Declaration of Conformity ..................61 7.1.1 W07FA3S-PCM1AC-PoE ...................
Page 13
Introduction This chapter gives you product overview, describes features and hardware specification. You will find all accessories that come with the HMI device in the packing list. Mechanical dimensions and drawings included in this chapter. 7” S-Series HMI...
The HMI device features P-Cap touch-screen. These models sealed with front IP 65 dust and water proof, and full IP22. The W07FA3S-PCM1AC-PoE model support an exceptional feature - LED light bar. With the help of red, green, blue and orange LED indicators you can see the status of the machine or processes afar.
User Manual Chapter 1 Introduction 1.3 Software Support Programming Guide: Android Linux 1.4 Packing List Carefully remove the box and unpack your HMI device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately.
User Manual Chapter 1 Introduction 1.4.2 Options Package may include optional accessories based on your order. VESA Desk Stand Model Name: PCVS-V1 Part Number: 99KK00A0000E VESA Desk Stand Dimensions 7” S-Series HMI...
2MP Camera (optional) ② GIGA LAN/ PoE ⑥ RS-232/422/485 ⑩ *RGB LED Light Bar ③ USB OTG ⑦ 9~24V DC-in ④ RS-232/422/485 ⑧ 1 Watt Speaker *RGB LED light bar only available for the model number W07FA3S-PCM1AC-PoE 7” S-Series HMI...
User Manual Chapter 1 Introduction 1.6 Dimensions *Note: Measurements shown in mm. **Note: this is a simplified drawing and some components are not marked in detail. 7” S-Series HMI...
Getting Started This chapter tells you important information on power supply, adapter and precautions tips. Pay attention to power considerations. 7” S-Series HMI...
2 Getting Started This chapter provides information on how to connect the HMI device to the source of power, connector pinouts and the guideline to turn on/off the HMI device. 2.1 Powering On 2.1.1 AC Adapter Components AC Adapter Power Cable (12V/ 36W) Safety Precautions: ...
Ce produit doit être mis à la terre. Utiliser seulement un cordon d’alimentation avec mise à la terre. Si les règlements locaux le requiert, installer des câbles de mise à la terre supplémentaires. *Si vous n’utiliser pas une prise d’alimentation avec mise à la terre, vous pourriez remarquer une sensation de picotement électrique quand la paume de vos mains touche à...
Cable Mounting Steps: Connect HMI device (1) to a the AC adapter (2) Connect the AC adapter (2) to the power cord (3) Plug in the power cord (3) to a working AC wall outlet (4). The device will boot automatically.
Symbol DATA2 DATA3 +3.3V DATA0 DATA1 Card_Det 2.3 Changing Serial Port Settings Serial COM Port can be configured for RS-232, RS-422 or RS-485. Winmate provide COM port settings application for Android OS. Step 1 Settings > Accessibility 7” S-Series HMI...
Step 4 Comport 1 > RS232/RS422/RS485 * Configure Comport 1 settings 2.4 Turning On/ Off This section describes how to turn on / off the HMI device. To turn on the HMI device: 1. Connect the HMI device to the source of power/ 2.
Page 27
Operating the Device This chapter provides detailed information on how to operate the device. If you have been using Android touch-screen Panel PCs before, the interface may look familiar. Sections include system settings parameters. 7” S-Series HMI...
7" S-Series HMI Chapter 3 Operating the Device 3 Operating the Device This chapter provides detailed information on how to operate the device. If you have been using Android touch-screen Panel PCs before, the interface may look familiar. Sections include system settings parameters.
7" S-Series HMI Chapter 3 Operating the Device Scale Place two finger on the screen and pinching them together Type Touch where you want to type. A keyboard pops up that lets you type into the field. 3.3 System Settings 3.3.1 Set up the Device When you first turn on your HMI device, you’ll see a Welcome screen.
7" S-Series HMI Chapter 3 Operating the Device Back Opens the previous screen you were working in. Once you back up to the Home screen, you can’t go back any further. Home Opens the central Home screen. To open Google Now, swipe up. Recent Apps Opens a list of thumbnail images of apps you’ve worked with recently.
Page 31
7" S-Series HMI Chapter 3 Operating the Device You can also access display settings in settings: Go to Settings > Display > Brightness Tap the cursor to the left to reduce the brightness. Tap the cursor to the right to increase the screen brightness. 7”...
7" S-Series HMI Chapter 3 Operating the Device 3.4 Ethernet AP Step 1 Connect Ethernet Cable to the HMI device. Step 2 Go to APPS > Ethernet Step 3 Ethernet APP main menu appears Setting Description Check Ethernet Check Ethernet connection parameters: IP mode, IP address, DNS address and others Configure Ethernet Enable Ethernet connection and configure its such as connection...
7" S-Series HMI Chapter 3 Operating the Device 3.4.1 Configuring Ethernet To configure Ethernet settings go to Apps > Ethernet > Configure Ethernet *Default settings: Ethernet OFF. Swipe Ethernet ON to activate Ethernet connection. Connection Type Setting Description DHCP The device automatically capture IP-address from the router Static IP Allows to manually set up IP-address, DNS, Network and Gateway 3.4.2 Checking Ethernet...
Adjust the intensity of Red, Green and Blue light. 3.6 Winmate® Home Manager (WHM) Winmate® S-Series HMI running on Android OS comes with preinstalled APP named Winmate Home Manager (WHM) which let the device manager to lock the launcher then the user can only use one application assigned by the device manager.
7" S-Series HMI Chapter 3 Operating the Device 3.6.1 How to Lock Applications Step 1 In the main APPS window, select the Home Manager APP and tap it to open. Home Manager is setting which app you want to run up automatically after booting. Password Manager is settings WHM password (Default is “0000”).
Page 36
7" S-Series HMI Chapter 3 Operating the Device Step 2 Go to “Application Selector”, and choose the app which you want to run up automatically after booting. Step 3 Go back to “Home Selector” and press “Clear and Reset Default Home”. 7”...
7" S-Series HMI Chapter 3 Operating the Device Step 4 Select “Restrict Home” and “Always”, and then restart the computer to enable these settings. The system will automatically start the application which you selected and lock it. Any time user presses home key or back key; the system will go back to the same application which you have selected.
Page 38
7" S-Series HMI Chapter 3 Operating the Device Step 2 System will request the password to login. Default password is “0000”. Step 3 Restart the system and you will go back to the normal Launcher. 7” S-Series HMI...
7" S-Series HMI Chapter 3 Operating the Device 3.7 Using Front Camera Your device has a built in camera. 3.7.1 The Camera Menu To open the camera, open All APPS , and then tap on camera icon Icon Description Action Location setting Tap to open location settings.
7" S-Series HMI Chapter 3 Operating the Device 3.7.2 Shooting Photos 1 Open the Camera 2 Focus on the object 3 Tap to capture the object 4 By default, the photo preview is displayed briefly on the screen The preview screen automatically closes after 3 seconds. Alternatively, do one of the following: Icon Description...
7" S-Series HMI Chapter 3 Operating the Device 3.7.2.2 Camera Settings to open camera settings. Icon Description Action Zoom in/ Zoom out Tap to zoom in or zoom out the picture. Exposure Tap to change exposure settings. 3.7.3 Shooting Videos Short tap >...
7" S-Series HMI Chapter 4 Software Installation 4 Software Update This chapter contains software installation and update guides. All the programming guides can be found in the driver CD included in the package. 4.1 Android Debug Bridge (ADB) Driver Installation IMPORTANT: If your computer is running on Windows Embedded 8 Standard or Windows 8.1 Industry Pro OS system, you need to disable driver...
7" S-Series HMI Chapter 4 Software Installation 4.1.1 Disabling Driver Signature on Windows 8 Step 1 Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, and then click the gear icon (Settings). Step 2 Click Change PC Settings.
Page 45
7" S-Series HMI Chapter 4 Software Installation NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’ Step 5 After restarting, click Troubleshoot. 7” S-Series HMI...
Page 47
7" S-Series HMI Chapter 4 Software Installation Step 8 Click Restart. Step 9 After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard. Your computer will restart automatically. 7”...
Page 48
7" S-Series HMI Chapter 4 Software Installation Step 10 After restarting, you will be able to install the ADB drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway. If you are unfamiliar with installing drivers, check out our Installing ADB driver tutorial for a step by step guide.
7" S-Series HMI Chapter 4 Software Installation 4.1.2 ADB Driver Installation Step 1 Confirm whether the USB device was found by the system. Device Manager > 120A > Other devices > FA33_Taurus > Update Driver Software Step 2 In the Update Driver Software window choose Browse my computer for driver software.
Page 50
7" S-Series HMI Chapter 4 Software Installation Step 3 Select Let me pick from a list of device drivers on my computer. Click Next. Step 4 Select from your computer Step 5 In the Update driver software window, click show All Devices and then click Next. 7”...
Page 51
7" S-Series HMI Chapter 4 Software Installation Step 6 The system is looking for the driver folder. Click Browse. Step 7 Select the driver for your OS system. Click Open. 7” S-Series HMI...
Page 52
7" S-Series HMI Chapter 4 Software Installation Step 8 Windows Security window will pop up. This message is used to confirm whether the user wants to install the driver. Select Install this driver software anyway to continue. Step 9 When the installation is successfully completed you will see Android ADB Interface driver in the Update Driver Software window.
7" S-Series HMI Chapter 4 Software Installation 4.2 Installing Android Debug Bridge (ADB) For detailed Android Debug Bridge (ADB) information refer to Android Developers Platform: http://developer.android.com/tools/help/adb.html Step 1 Decompress adb.zip. Open ADB terminal and move into the adb archive. ADB Terminal window Step 2 Connect the HMI device to the computer via USB.
7" S-Series HMI Chapter 4 Software Installation 4.4 OTA Update Guide OTA is a tool which can help you to update OS image. To receive Android OS image file contact our sales representatives. Once you get the image file follow the guideline below.
Page 56
7" S-Series HMI Chapter 4 Software Installation Step 4 Tap Update Image Step 5 Make sure the file founded by the system is image update file. Tap OK. Step 6 Tap OK. Make sure the battery level is at least 50%. 7”...
Page 57
7" S-Series HMI Chapter 4 Software Installation Step 7 Tap OK. IMPORTANT: Do not disconnect the power source! Do not remove the battery! Step 8 After update the system will automatically restart. 7” S-Series HMI...
7" S-Series HMI Chapter 4 Software Installation 4.5 OS Image Update Guide Step 1 Decompress the archive FSL_MFG_TOOL_WM.zip Step 2 Go to the directory “FSL_MFG_TOOL_WM\Profiles\MX6Q Linux Update\OS Firmware\files\android”. 7” S-Series HMI...
Page 59
7" S-Series HMI Chapter 4 Software Installation Step 3 Move the following items to one folder: the u-boot-6q.bin, boot.img, system.img, userdata_img.tar.gz and recovery.img Step 4 In FSL_MFG_TOOL_WM folder that you decompressed in Step 1 click “MfgTool2.exe”. MfgTool_MultiPanel window pops up. 7”...
Page 60
7" S-Series HMI Chapter 4 Software Installation Step 5 Go to the main APPS screen > Settings Step 6 Settings > About tablet 7” S-Series HMI...
Page 61
7" S-Series HMI Chapter 4 Software Installation Step 7 Settings > About tablet > Additional system updates Step 8 Warning menu pops up. Confirm the system update by clicking YES. IMPORTANT: Make sure OTG and power already connected. Do not disconnect the OTG from the source of power while system is updating.
Page 62
7" S-Series HMI Chapter 4 Software Installation Step 9 Enter the hint number 1655 to confirm the update and click OK. Step 10 In the dialog click Yes to shut down and restart the system. 7” S-Series HMI...
Page 63
7" S-Series HMI Chapter 4 Software Installation Step 11 After the system reboot you will be able to see the system change. No Device Connected > HID-compliant Step 12 Click Start to upgrade the system. Step 13 After the successful update the screen is shown as below: 7”...
Page 64
Mounting Solutions This chapter provides step-by-step mounting guide for all available mounting options. 7” S-Series HMI...
7" S-Series HMI Chapter 5 Mounting Solutions 5 Mounting Solutions This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. 5.1 Cable Mounting Considerations For a nice look and safe installation, make sure cables are neatly hidden behind the HMI device.
7" S-Series HMI Chapter 5 Mounting Solutions 5.3 Mounting Guide S-series HMI devices come with different mounting options suitable for most of the industrial and commercial applications. The main mounting approach is chassis - very user-friendly in terms of installation. Refer to sub-sections below for more details. CAUTION/ ATTENTION Follow mounting instructions and use recommended mounting hardware to avoid the risk of injury.
7" S-Series HMI Chapter 5 Mounting Solutions 5.3.2 Flush Mount / Panel Mount Panel Mount mounting solutions is suitable for many applications where HMI should be embedded in the machine. With this mounting solution flat surface leave no bezel in the front.
7" S-Series HMI Chapter 5 Mounting Solutions 5.4 Optional Mounting Solutions 5.4.1 Desk Stand The device can be installed on a desk with the stand. You can purchase desk stand as an optional accessory. Mounting Steps: Use provided Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device.
Item Driver Description Android Driver USB Driver Android Driver USB OTG Driver Winmate provides the following SDK for S-Series HMI with Freescale® Cortex® A9 i.MX6 Dual Core processor: Item File Type Description Android SDK Linux SDK Winmate provides OS Image Downloading Guide for S-Series HMI:...
7" S-Series HMI Chapter 6 Technical Support 6.2 Problem Report Form 7" S-Series HMI (Slim-line) Customer name: Company: Tel.: Fax: E-mail: Date: Product Serial Number: __________________________________________ Problem Description: Please describe the problem as clearly as possible. Detailed description of the occurred problem will allow us to find the best solution to solve the problem as soon as possible.
Page 73
Certificates This chapter includes FCC and EC Declarations of Conformity. 7” S-Series HMI...
7" S-Series HMI Chapter 7 Certificates 7.2 EC Declaration of Conformity 7.2.1 W07FA3S-PCM1-PoE Refer to Preface for letters abbreviations in English and other languages. 7” S-Series HMI...
7" S-Series HMI Chapter 7 Certificates 7.2.2 W10FA3S-PCH2-PoE Refer to Preface for letters abbreviations in English and other languages. 7” S-Series HMI...