Table of Contents
Advertisement
Changing Serial Port Settings
Serial port can be configured for RS-232, RS-422 or RS-485. Please
click here
to download Winmate® SDK for Ubuntu 16.04.
Get Mode
Use the Linux command cat to read the value in console.
There is no "new line" character after the string "RS-232", so we
append ";echo" to show you the real string.
Set Mode
Use the Linux command echo and > to write/read the value in
console.
For example:
echo RS-232 > /dev/com0_switch_dev
echo RS-422 > /dev/com0_switch_dev
echo RS-485 > /dev/com0_switch_dev
RS-232/422/485 Switch
To configure serial port settings follow the instructions below:
1. Open Linux Terminal, enter command code to change serial port
settings.
To find Serial Port command code, please refer to
Appendix C
of this
manual.
- 25 -
Advertisement
Table of Contents
