Care And Cleaning; Notes On Cleaning; Removing The Shelf Supports; Pyrolysis - John Lewis JLBIOS633 User Manual

Table of Contents

Advertisement

Care and cleaning

Warning! Refer to Safety
chapters.

Notes on cleaning

• Clean the front of the oven with a soft cloth
with warm water and a mild cleaning agent.
• To clean metal surfaces, use a dedicated
cleaning agent.
• Clean the oven interior after each use. Fat
accumulation or other food remains may result
in a fire. The risk is higher for the grill pan.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories after each use and let
them dry. Use a soft cloth with warm water and
a cleaning agent.
• If you have nonstick accessories, do not clean
them using aggressive agents, sharp-edged
objects or a dishwasher. It can cause damage to
the nonstick coating.

Removing the shelf supports

To clean the oven, remove the shelf supports.
Caution! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away from
the side wall.
2. Pull the rear end of the shelf support away
from the side wall and remove it.
38
1
2
Install the removed accessories in the opposite
sequence.

Pyrolysis

Caution! Remove all
accessories and removable
shelf supports.
Do not start the Pyrolysis if you did
not fully close the oven door. In
some models, the display shows
"C3" when this error occurs.
Warning! The oven becomes
very hot. There is a risk of
burns.
Caution! If there are other
appliances installed in the
same cabinet, do not use
them when the Pyrolysis
function operates. It can
cause damage to the
appliance.
1. Wipe out the cavity with a wet, soft cloth.
2. Clean the inner side of the door with hot
water, so that the residues do not burn from
the hot air.
3. Set the Pyrolysis function. Refer to "Daily use"
chapter, "Oven Functions".
Oven User Manual

Advertisement

Table of Contents
loading

Table of Contents