Call Completion - Snom D315 User Manual

D315 | D305 User Manual
Turning call forwarding on
1. Web interface > Configuration Identity > Features tab > Call Forwarding.
2. Click "On" after the forwarding event (Always, Busy, Timeout).
3. Click on "Apply" and "Save".
Turning call forwarding off
1. Web interface > Configuration Identity > Features tab > Call Forwarding.
2. Click on "Off" after the forwarding event (Always, Busy, Timeout).
3. Click on "Apply" and "Save".
C
all completion
On Snom phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available again. The
factory default setting is "off".
Note: This function must be supported by your VoIP provider and/or your PBX.
On the phone
Turning on call completion
1. Press > 2 Call Features > 2 Outgoing Calls > 4
2. Press or scroll down to the setting and press
4

Call Completion.

3. Press briefly to return to the previous menu, press
screen.
Turning off call completion
1. Press > 2 Call Features > 2 Outgoing Calls > 4
2. Press or scroll down to the setting and press
4 Call Completion.
3. Press briefly to return to the previous menu, press
screen.
On the web interface
Open the phone's web interface > Advanced Settings page > Behavior tab > Phone Behavior section >
Call completion: Click the radio button on.
Customizing the Phone Settings
Call Completion.
to change it from off to on:
for two seconds to return to the idle
Call Completion.
to change it from on to off:
for two seconds to return to the idle
76